|
|
|
| Quantity in Basket:
None
| Code: Q_GREEN_TAPE |
Price:
|
|
| |
Untitled Page
|
Thread Sealing Tape For Oxygen
|
- Extra processing makes this degreased tape suitable for Oxygen use.
- BAM approved.
- This high density tape is used widely within the oxygen industry.
|
|
PART NUMBER
|
SIZE
|
CASE QTY.
|
PRICE/ ROLL
|
|
CTO0009
|
6.5 mm x 12 M
|
300 Ea
|
$3.05
|
|
CTO0002
|
12 mm x 12 M
|
500 Ea
|
$5.77
|
|
CTO0005
|
19 mm x 12 M
|
300 Ea |
$7.99
|
|
CTO0008
|
25 mm x 12 M
|
300 Ea |
$10.40
|
|
Untitled Page
|
GREEN OXYGEN THREAD SEAL TAPE
|
APPLICATION
This tape is specially formulated and degreased, making it excellent for Oxygen use. This high density tape is used widely within the oxygen industry.
Two to three wraps is all that is needed. It does not string or shred during application
|
Start wrapping the male threads at end of the pipe but do not lap over the end. Doing so may result in reduced water pressure or even clogs from bits of the tape that get into the water supply.
|
|
Make a couple of loops around, at the end of the thread. Wrap all threads, overlapping half the width of the tape on each wind.
|
|
Wrap in the direction of the threads starting from the end and proceeding toward the length of the pipe.
Wrapping the wrong way may result in the tape coming unwound as the fittings are tightened.
As you wrap, keep tension on the tape so that it is pulled into the threads.
|
|
If you loosen or disconnect a fitting, remove the old tape and rewrap with a fresh piece.
|
- Use of PTFE Teflon tape does not guarantee a leak free connection.
- Always inspect connections, with water pressure, for leaks before sealing them.
|
|
|
