|
|
|
| Quantity in Basket:
None
| Code: Q_PINK_TAPE |
Price: Price: $3.64
|
|
| |
Untitled Page
|
PTFE Pink Thread Seal Tape: Water and Hydraulic
|
|
Part Number
|
Width x Length
|
Quantity Per Case
|
Price Per Roll
|
Price Per Roll Case Quantity
|
| CP12022 |
12 mm x 13.5 m
|
500
|
$2.32/ Roll
|
$2.06/ Roll
|
| CP12024 |
12 mm x 33 m
|
280
|
$4.67/ Roll
|
$4.16/ Roll
|
| CP12025 |
19 mm x 13.5 m
|
300
|
$3.23/ Roll
|
$2.88/ Roll
|
| CP12028 |
25 mm x 13.5 m
|
300
|
$4.17/ Roll
|
$3.71/ Roll
|
|
|
|
Untitled Page
|
APPLICATION:
|
High quality PTFE thread seal tape for the best seal in water and hydraulic applications. Excellent high pressure sealing.
Two to three wraps is all that is needed. It does not string or shred during application
|
Start wrapping the male threads at end of the pipe but do not lap over the end. Doing so may result in reduced water pressure or even clogs from bits of the tape that get into the water supply.
|
|
Make a couple of loops around, at the end of the thread. Wrap all threads, overlapping half the width of the tape on each wind.
|
|
Wrap in the direction of the threads starting from the end and proceeding toward the length of the pipe.
Wrapping the wrong way may result in the tape coming unwound as the fittings are tightened.
|
|
As you wrap, keep tension on the tape so that it is pulled into the threads.
|
|
If you loosen or disconnect a fitting, remove the old tape and rewrap with a fresh piece.
|
- Use of PTFE Teflon tape does not guarantee a leak free connection.
- Always inspect connections, with water pressure, for leaks before sealing them.
|
|
|
